31
Traceability options (ADMINISTRATOR only)
As the ADMINISTRATOR, in the TRACEABILITY screen you may access other traceability settings.
Enable and disable the identification options by touching the relevant buttons.
IDENTIFICATION AT CYCLE START sets which information will be requested to start a
cycle (user name, user name and PIN code, or disabled).
IDENTIFICATION AT CYCLE END
sets which information will be requested at the end of a cycle (user name, user
name and PIN code, or disabled).
CONFIRM LOAD RELEASE
At the end of the cycle, the identified user must check the load and release it as
valid.
From the CYCLE SELECTION screen (HOME screen), select: MENU – TRACEABILITY
and log in with your own PIN code, then select USER TRACEABILITY OPTIONS.
