Water tanks
Filling the clean water tank
•
Switch the sterilizer ON;
•
Remove the cap from the tank inlet;
•
Fill the water tank with app. 4 litres of distilled or demineralized water;
•
Once the clean water tank is almost full, an audible tone sounds; stop filling;
•
Place the cap to close the tank into its original position.
10
Draining the used and clean water tank
•
Open the service door at the front of the sterilizer.
•
Put a container (4 litres min) below the sterilizer and insert into it the free end of the drain tube.
•
Insert the drain tube into the left connector (grey) for the used water, or into the right connector
(blue) for the clean water.
•
Let the water flow from the tank completely.
•
Press the push-button on top of the quick connector to dislodge the drain tube.
Use only distilled or demineralized water as described in ANNEX 7.
Do not add any chemical / additive to the water.
Clean water drain (blue)
Used water drain (grey)
