Maintenance
70
Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
800-cycle or biannual maintenance
SEQUENCE OF PROCEDURES TO CLEAN THE WATER TANK
To clean the water tank, proceed as follows:
1
2
"Access to the water tank" on the next page" "Access to the water tank" on the next page.
3
"Clean the water tank" on page 72
PREPARE THE STERILIZER FOR CLEANING THE WATER TANK
Proceed as follows:
1
Switch OFF the sterilizer and disconnect the mains cable.
2
Completely drain both water tanks (see "Draining the used and clean water tank"
on page 75).
3
To drain the detergent solution during the subsequent cleaning, leave the drain
tube attached to the drain connection of the tank you want to clean.
Summary of Contents for Lexa PLUS
Page 1: ...RIS 311 Instructions for Use RIS 311 ENG Rev03...
Page 2: ......
