23
12. Control unit operation – Changing program (P1 – P5)
Activate the desired program (P1 – P5) by pressing the corresponding program button. During
selection an audible signal can be heard and the Program button lights up. The selected
program appears on the display with the adjusted range in rpm, e.g. for P1:
rpm
Ncm
rpm
Display settings
> P1 – P3 Speed
> P4 – P5 Torque
Pump operation
ON / OFF
Display settings
> P4 – P5 Torque in Ncm
> P1 – P3 Speed in rpm
Error messages
> Motor temperature too high
> Motor plug-in connection
Ensure when switching on the Implantmed that the LED displays on the buttons and the display itself are all on.
