43
> Clean and disinfect the medical device immediately after every treatment.
> Wipe the control unit, the universal support and the irrigant support with disinfectant.
Disconnect the power supply from the control unit. Check for any damage on the outer surface of each component.
Lightly wipe all external surfaces of the control unit with a soft, lint-free cloth moistened with a neutral detergent for medical
devices according to the manufacturer’s instruction.
Use a clean cloth moistened with disinfectant and wipe all surfaces. Make sure all surfaces remain visibly wet at room
temperature for at least the minimum time specified in the instructions for use supplied by the disinfectant manufacturer.
Note that the disinfectant used during pre-treatment is only for personal protection and cannot replace the disinfectant
step after cleaning.
Hygiene and maintenance
Initial treatment at the point of use
