14
Safety notes
Mains cable / Power switch
> Only use the mains cable supplied.
> Plug the mains cable only into an earthed power socket.
> Set up the control unit so the power switch and the socket are easily accessible at all times.
Disconnect the control unit from the power supply in case of danger.
> Turn off the control unit at the power switch.
> Pull the power plug out of the socket.
Observe the manufacturer’s speed and torque specifications for retaining screws for superstructures.
Adjusting these retaining screws with an electric motor presents a potential risk as described above.
Note that when using or setting low speeds, the operation or run-down of rotary instruments is more difficult to detect.