5.0 INSTALLATION AND FIXING
WAMFLO
®
FN200X
2
FIL.WAMFLO_FN200.EX.M.A7.0522.EN Issue: A7
05.22
38
5.1 General recommendations for installation
Important
The filters are packed so as to minimize the possibility of contamination during transport and storage.
To eliminate contamination residual risks generated by long journeys or long shut downs periods, run
a cleaning and sanitization cycle before starting it up.
Danger - Warning
The replacement operations must be carried out by a specialist authorized technician with specific
skills.
Provide appropriate safety measures and use suitable equipment to prevent risk of work accident to
persons involved in the operations and to those nearby.
Harness and handle the sections of the equipment concerned as described and shown in the “Unload
-
ing and lifting method” paragraph.
Before starting installation, define a safety plan which complies with the laws in force regarding workplace
safety.
The specialist technician, authorized by the installer or owner, must asses whether the area has been prepared
correctly and whether the necessary installation equipment is available (crane, etc.).
Define, on the basis of the configuration of the equipment concerned, the assembly method.
Check, and if damaged, repair the coupling surfaces.
Clean the coupling surfaces thoroughly.
General recommendations
Assembling on the silo
NO!
OK
