WAM WAMFLO FOOD FN200X Page 40 Assembly And Main Instructions For Use And Maintenance Download

Page: 40 / 85

4.0 INFORMATION REGARDING HANDLING

AND TRANSPORT

WAMFLO

FN200X

FIL.WAMFLO_FN200.EX.M.A7.0522.EN Issue: A7

05.22

- Loosen the screws of the box

- Remove the box

NOTE:

The packaging material has to be disposed off or recycled in compliance with the standards in force.

The operation is in charge of the installer.

Lifting the filter

Lift and handle the equipment only by the eyelets provided for the purpose. Use lifting systems suitable for the

weights, dimensions and movements to be carried out. Hook to the filter by means of the safety hooks. do not

use clamps, rings, open hooks or systems that do not ensure the necessary safety level.

Summary of Contents for WAMFLO FOOD FN200X






















































































Search results

Summary of Contents for WAMFLO FOOD FN200X

Reviews:

Related manuals for WAMFLO FOOD FN200X

Brands by name

Popular brands

WAM WAMFLO FOOD FN200X, Assembly And Main Instructions For Use And Maintenance

Search results

Summary of Contents for WAMFLO FOOD FN200X

Reviews:

Related manuals for WAMFLO FOOD FN200X

Brands by name

Popular brands