7.0 INFORMATION REGARDING MAINTENANCE
SILOTOP R03
2
FIL.100.--.M.EN Issue: A2
06.12
44
Danger - Warning
Before carrying out any maintenance activity, activate all the safety devices to ensure the safety of the
persons involved in the operations and those near by.
Set the equipment concerned in safety condition (see 2.0 Information regarding safety).
Wear suitable personal protection equipment; in this regard, consult the person in charge of produc-
tion activites safety.
- Scheduled maintenance Table
Component
Operation to be carried out
Daily
Every
month
Every
six
months
Every
two
years
Manual
reference
Safety devices
Performance check
•
Inspection hatches
Checking the condition
•
Flanged assembly
Checking the seal
•
Air tank
Checking the pressure and
condensation
•
Filter elements
Checking the state of the
filter media and differential
pressure
•
Compressed air
Checking value and presence
•
Control panel
Checking the condition
•
Solenoid valve
Checking the functioning and
condition
•
Blowing pipes
Checking the condition
•
7.1 Cleaning the equipment (the machine)
Clean the outside part of the equipment (the machine) using a vacuum cleaner to prevent dispersal of dust in
the environment and in the surrounding area; or use a moist cloth.
Do not use compressed air.
Wash the equipment (the machine), after vacuuming the dust, with a low-pressure water jet.
Jamieson Equipment Company | 5314 Palmero Court | Buford, GA 30518 | 800.875.0280 | [email protected]
