Walz MINI-PAM-II, Manual, Page: 75 / 130

Touchscreen Operation Chapter 7
69
If “ External Actinic Illumination ” is displayed by the window
“Actinic Light List”, the CAL command adjusts the PAR emitted
by the 2054-L External LED Source as measured by an external
sensor (typically that of the 2035-B leaf clip) to the PAR values of
the Actinic Light List.
The CAL command switches the PAR sensor of the 2035-B leaf
clip automatically to the “Mixed Mode” (see Section 7.3.4.2, page
88), and adjusts each of the four light types of the 2054-L lamp.
After calibration, the measuring mode of the PAR sensor is re-
turned to its previous mode. Therefore, make sure that the Mixed
Mode is selected when checking the light intensities after calibra-
tion.