Walz MINI-PAM-II, Manual, Page: 15 / 130

Components and Setup Chapter 4
9
Table 1: Backside of MINI-PAM-II.
Numbering refers
to Fig. 1, page 8 Function
LEAF CLIP
Socket for 2035-B Leaf-Clip Holder
AUX 1
Electronically configured as LEAF CLIP socket
AUX 2
Electronically configured as LEAF CLIP socket
SYNC
Socket for external light source which emits synchronized with
MINI-PAM-II measuring light
ON/OFF
MINI-PAM-II switch
USB SOCKET
Receptacle for MINI-B USB plug.
EXT. DC
Socket for Power Supply MINI-PAM-II/N
COMP 2
Prepared for peripherals mastering RS232 communication (e.g.
bar code scanner)
COMP 1
Electronically configured as COMP 2
LIGHT PORT
Port for Fiberoptics MINI-PAM/F
Note Great caution should be exercised to prevent dirt or foreign
matter from entering the ports or sockets of the MINI-PAM-II. Do
not force a plug into the wrong socket. Orientate
each plug so that the red dot on the plug coin-
cides with the red dot of the socket. Do not try to
disconnect a plug by pulling at the cable. Dis-
connect plug by pulling at the rippled bushing of the plug.
2
1
3
4
5
6
7
8
9
10