Revision 15
8
4. Product Summary
The WDC100 series electronic control units are designed to operate the water outlets
(x1) (Hot and Cold), to a wash basin (or a bath model WDC100-1), a shower (x1)
(premixed warm water) and the flush for toilet water closet pan (x1) (WC).
The WDC100 therefore has the capacity to control one suite of products.
The WDC100-1 model is preset to operate the water outlets on a bath instead of a
wash basin.
The WDCA100 model based upon the WDC100 is for 120V 60Hz electrical supply
operation using an external power adapter (UL/CSA approved) to connect to the
12VDC input socket on the WDCA200 control unit.
The control unit comprises of a microprocessor that is programmed with a software
program that has the following operational features:
User friendly Software menu system with security controlled access.
Independent control of multiple outlets.
Fully programmable precise time control of water valve operation that is fully
adjustable in situ by the installer / customer.
“
LOCKOUT
” function to prevent product misuse that is fully adjustable for the
number of user operations, operations period, lockout period, and the
“
LOCKOUT
” function can be
ENABLED
or
DISABLED
to suit the individual
requirements.
Single or dual flush for WC control.
Piezo touch button or infra-red sensor capable inputs.
Auxiliary inputs for remote operation of:
Product lockouts.
WC remote flush.
WC reduced flush using a second touch button.
Clear lockouts.
Purge function.
Flow sensor for hygiene purge data logging.
Multiple shower control feature (
COMMUNAL
mode setting), so that one unit can
be used to operate up to four shower valves instead of basins and WC pans.
Diagnostic test routine to assist with fault finding
Networking units to remotely control from a central PC desk position(s).
Data logging of Hygiene Purges.
