Revision 15
14
5.6.
Commission the Unit
All the switches and the menu display is located on the front panel of the
WDC100 control unit. Refer to
Figure 3
below for an illustration of the WDC100
front panel.
Figure 3. Front Panel WDC100
5.6.1.
Purge Cycle function
The control unit has a
Purge Cycle
function you can use when commissioning
the installation of the basins, showers and WC sanitary ware.
The
Purge Cycle
function opens the water valves for the basin/bath, shower and
WC pan in an automatic sequence. This can help release any air trapped in the
plumbing system.
The
Purge Cycle
sequence does the following:
Runs the basin/bath hot and cold water for 1 minute.
Valve
sockets
Legend
Menu
Key
Up
Arrow
Key
LCD
Display
Down
Arrow Key
Return /
Accept
Key
Input
Sockets
Legend
2 Amp
Fuse
