37
WDC200-NX Electronic Water Management.
Revision-2
10 System Test Function
A system test can be done by selecting
Test Mode
This will test the inputs (Piezo touch buttons or infrared sensors) and the outputs
(water valves). This is useful for fault finding if any of the valves fail to operate. This
function can also be used to confirm Piezo touch buttons and valves have been
connected to the correct sockets on the control unit.
NOTE: The control unit cannot set the water temperature for pre- mixed
supplies or showers. For these applications, seek advice from the plumbing
contractor or architect. TMV3 thermostatic valves are usually used in these
applications.
11 Data Logging
Data logging records the events of all functionalities including the hygiene purge
operations. The data logs are stored locally on the WDC200-NX and can be
exported to a PC or laptop. The download data is in the form of a csv file and can be
viewed via WDCMS or exported to an external database.
