Revision 3
18
Product Manual ALB-01, 03 & 05
6.2.
Maintenance
General wear mainly affects the components in contact with water. If the unit is
installed in a hard water area, lime scale removers must be used on the bath and
water nozzle components.
The water aerator nozzle can be dismantled using a special key and the inserts can
either be replaced or immersed in a lime scale remover solution for cleaning. Details
of the key and components are given in the spares list table below.
Part Number
Description.
WN4003
Water nozzle aerator insert
RW9602
Rubber seal for WN4003
WF4002
Locking ring for WN4003
DL7523
Key to remove Tap head aerator nozzle ring (FLAT TYPE KEY)
DL7539
Key to remove Tap head aerator nozzle ring (CIRCULAR TYPE
KEY)
Table 2 Spare Parts List
7. Related Documentation
The ALB bath can be used with any of the following control units:
•
WDC100. For more information on this control unit, refer to the WDC100
product manual.
•
WDC200. For more information on this control unit, refer to the WDC200
product manual.
•
INS-ALB-01 Bath Installation drawing.
•
INS-ALB-03 Bath Installation drawing.
•
INS-ALB-05 Bath Installation drawing.
Summary of Contents for ALB-01
