Wallgate ALB-01, Product Manual

Page: 16 / 20

Revision 3
16
Product Manual ALB-01, 03 & 05
5.6. Technical Specifications
Bath only, Weight 70 Kg
Dimensions, ±3mm 1696mm (L) x 499mm (H) x 748mm (W)
Water Supply Minimum operating pressure 0.5 Bar (See note 1 below)
Minimum recommended dynamic pressure 1 Bar (See note 2)
Maximum rating 10 Bar
Flow rate 30 LPM
Supply pipe size 22mm copper
Waste connection
40mm (1½” pipe)
Bath water volumes:
1.
Volume to
overflow.
2.
Volume when
water depth in
bath is 153mm.
148 litres
85 litres
Optional Control Unit Specifications
Power supply
230V AC 50/60Hz 2 Amp single phase
USA / CANADA:
120V AC 2Amp, 60Hz for models WDCA100 and
WDCA200.
Power rating
Maximum power rating 60 W
Weight 1.0 Kg
Dimensions 200mm (W) x 150mm (H) x 80mm (D)
Enclosure IP Rating IP53
Regulatory
compliance Complies with RoHS, LVD 2014/35/EU and EMC
2014/30/EU directives.
Table 1. Technical specifications
NOTE: The minimum operating pressure quoted is the minimum that the water
solenoid valves will operate at. At this minimum pressure the flow will be no
greater than 6 litres per minute & could potentially be a lot less depending
upon the size of feed pipes and type of water feed whether mains fed, or
gravity system fed.
NOTE: The recommended minimum dynamic pressure of 1 Bar will deliver a
flow rate of 12 LPM with a suitably sized water feed pipe (min 22mm) and
supply.