- 7 -
After few minutes heater is
ignited and flame indicator is
shown.
Heater will start increasing
power.
Scroll the selection square
around the temperature target
and press the button.
When temp selection is active
and you can change temperature
target setting by rotating the
Control Ring.
Heater status bar
indicates it's state
- starting
- stopping
- paused
Settings:
Settings menu
- you can scroll and select the row.
For example, select " Temp
Sensor".
Temp sensor
-wired is sensor hardwired to
heater unit.
- wireless sensors are listed by
sensor address.
-select any sensor to measure
room temperature.
Device Info
- shows you heater software
versions.
Device Stats
- shows you heater statistics.
Temp Unit
- select temperature unit
Celcius / Fahrenheit.
Connections
- clear all bonded mobile phone
devices.
Clear Lock
- if error message "Device locked"
is shown and lock indicator is
displayed.
- CHECK the heater before
removing locked state by selecting
"Clear Lock"
ERROR message
- If something goes wrong, there
are many error messages, and
they are shown immediately when
error happens.
- If there are three errors in a row
the Wallas unit will be Locked for
safety reasons.
