- 12 -
3. You mobile device is not in power save mode and location premission is given to Wallas application.
4. Check that heater is connected into power and Control panel is connected into heater. ( Rotate panel control ring ,
lights on)
5. Distance between Mobile device and Control Panel is not too long.
6. Control Panel is not in use by other person, ( only one local connection can operate panel at time.)
7. If you mobile device has allready connection into heater it can not create new before old connection is removed from
you device. In some phone models this has to be made manually. Remove "WALLAS OP" from your phones paired BT
devices list (note there might be several OP pairings in mobile device list, remove all) and restart Bluetooth before new
pairing is possible. This may be the case if control panel pairing code only blinks fast and you mobile device is
repeating the connection requests.
8. Change connection to other Wallas heater.
- close Wallas remote application .
- remove old connections from you mobile device bluetooth paired devices list. Resatrt you devices bluetooth.
- if there is no other users for new Wallas heater you can select Control panel menu Settings/ Connections/remove all
- Restart application. When/if "Change Device " link appears (30-60 sec) press the link.
- Wait connection procedure to finalize. Note in some phone models Pairing request will open in background info
window. ( See you mobile devices user guide.)
