- 14 -
For SW update make sure you have
strong and reliable wifi signal.
Wifi HotSpot name (SSID) is visible in
application page and status is
"Connected".
It is advised to turn the heater "OFF"
before starting the update. Update may
take up to 6 minutes, depending on
network and connection.
If new SW version is
available "Update link"
will appear into display.
Select uppdate.
Do not close application
or heater power while
update in ongoing.
Control panel display will
close and start a few
times during the update.
After the update is done,
control panel will start
and application will
reconnect to panel. Note
in some phone model you
may have to re-bonding
after SW update again.
Wait 5 minutes update to
finish.
If update is not
succesfull, file error:
- start update again after
few minutes
If update is stopped
during download
( % count is no 100%)
-close application
-restart you device BT.
- start update again.
if update is not able to
finish:
- find different place,
where wifi signal is better
or wifi hotspot has better
connection.
If control panel is jammed
during update ,
disconnect panel cable
and try again after few
minutes.
