Walkera ZHUN Quick Start Manual Download Page 12

ZHUN 

Quick Start Guide

Walkera  All Rights Reserved

12

15. The camera zoom control: 
      Divided into wide Angle (W) and Telescope (T).

16. GPS positioning” appears when GPS connected; “GPS not 
      positioning” appears when GPS disconnected.

18. Screen capture: Tap the icon to save an image of what is currently 
      displayed on the entire screen.

19. Flight status parameters:
      Distance(D): horizontal distance between aircraft and returning point.
      Height(H): vertical distance between aircraft and returning point.
      Horizontal speed(H.S): speed of aircraft in a horizontal direction.
      Vertical speed(V.S): speed of aircraft in the vertical direction.
      Pitch angle(P): The front and rear tilt angles of the aircraft.
      Roll angle(R): The left and right tilt angle of the aircraft.
       Heading angle(Y): The left and right steering angle of the aircraft.

20. Map thumbnail icon: Click the map thumbnail icon to quickly switch to the map interface (please turn off the aircraft power before 
      flight and click "map thumbnail" when networking,Fig.7.0-2)

7. High-definition image transmission signal strength: Shows 
    the strength of the video signal transmitted between the 
    aircraft and the remote control.

13. Focusing: tap the icon "+,-" to adjust camera focusing.

14. Camera Working Mode Switch: click the“      ”icon once, and 
       the camera working mode will switch between photo&  video 
      modes once.

When switching to taking photos: tap the“      ” icon to 
trigger the camera to take photos.
When switching to recording: tap“      ” icon to start/stop 
recording.

8. Remote signal strength: Displays the control signal strength 
     between the remote control and the aircraft.

9. Remote battery level: Displays the current remaining battery 
    power of the remote control in real time.

10. Battery Voltage: Displays the current flying battery voltage 
      in real time.

11. Setting:  Click the icon“     ”to open the Setting menu, 
      Normal setting, aircraft, remote control, gimbal and 
      battery can be set.

12. Camera Settings: 
      Touch Camera icons“     ”it has preview settings, recording 
      settings and so on. Under identical Video Size, the larger 
      the stream Rate, the better the picture quality, meanwhile, 
       the video transmission distance is shortened accordingly.

Map lock

Map switch

Heading of the aircraft

Circle flight

Waypoint flight

Waypoints flight

5

4

3

 

m

15

14

Connected

GPS

03:58:45

AUTO Mode

18

2.4G

98%

51.98V

GPS Ready

15  m

D

H

H.S

V.S

17.1  m

0.0 m/s

0.0 m/s

P

0.0°

R

0.0°

Y

0.0°

This model is 

not available

This model is 

not available

Waypoints 

flight mode

Fig.7.0-2

17. Remote control system navigation icon:
      “    ”Returns: tap the icon to return to the previous level;
      “    ”Returns to the system desktop: Tap the icon to return to 
      the system desktop;
      “    ”Task Management: Tap the icon to display all taskscurrently 
      running;

MODE

Summary of Contents for ZHUN



























Reviews: