-9-
10.0 Prepare the VOYAGER 4
The factory default of the aircraft is Travel Mode. Before flying, connect to power, transform the aircraft
to Landing Mode, please don't use the outside force.
Travel Mode
Landing Mode
Transform the aircraft to landing mode, please hold the aircraft so as not to damage the Landing Gear.
If the red and blue lights are flashing alternately, it indicates the aircraft is not normal,
see the APP indications.
Attention:
Gimbal Lock
Positioning Column
Gimbal Console
Lock
Location Hole
Screw Hole
Position
Rotate the Gimbal Lock to the locked position
following to the direction of the arrow.
Tighten M3x3 screws to fix the Gimbal.
Install Gimbal and Camera
Remove gimbal cover.
Aim the gimbal positioning column to upper location hole ,
and rotate the white line of Gimbal lock to unlocked position,
align the white lines and insert the gimbal.
Insert the battery.
Power on the remote controller and the aircraft.
The red LED light flashes until goes out, indicating that
IMU preheating is complete and the code binding is successful.
(Automatically transform the aircraft to Landing Mode.)
Please turn off the remote controller and aircraft after finishing.
Quick Start Guide