-19-
Stick Calibration:
Attention:
Long press " " button for 3 to 5 seconds, four lights flash alternately to enter stick calibration.
Operate the stick several times within mechanical tuning range and then back in the middle. Long press
the " " button for 3 to 5 seconds again, four indicator lights turn on, then exit stick calibration.
When you exit if vibrate alert, then the calibration fails, please recalibrate.
Tip:
14.3 Remote Controller stick mode switch and stick calibration
DEVO F18 stick mode and stick calibration has been set up before out of factory,
if you need to switch and calibration, please refer to the following methods.
It must be operated under power off or motors are locked well.
※
Customization also supported in APP software.
Landing gear
Landing gear
Quick Start Guide
When power indicate lights up, exit the stick mode switch.
Choose MODE 1
、
MODE 2
MODE 1
25
10
MODE 2
Stick Mode Switch
Enter stick
Mode
switch
Exit stick
Mode
switch
1. Long press “ ” 3~5 sec
3. Long press “ ” 3~5 sec
2. Short press “ ”
MODE 2
Rudder
Throttle
Elevator
Aileron
MODE 2 is left-hand throttle
MODE 1
Elevator
Rudder
Throttle
Aileron
MODE 1 is right-hand throttle
When power indicate lights off, enter the stick mode switch.
power indicate lights
match the stick mode
IOC
IOC
IOC