![background image](http://html1.mh-extra.com/html/walkera/voyager-4/voyager-4_quick-start-manual_870515010.webp)
-10-
Voyager 4-4G-4K
Voyager 4-WIFI-1080P
Voyager 4-WIFI-4K
Install propellers
Fix the CW propeller( ) onto the CW motor according to the
direction of blue arrow, and fix the CCW propeller( ) onto
the CCW motor according to the direction of orange arrow.
Tighten the propellers manually and make sure the propeller
is installed in proper way and fastened.
CW propeller
(
)
CW propeller
(
)
Front
CCW propeller
(
)
CCW propeller
(
)
11.0 Ready to fly
Place the aircraft in a wide open space, with the rear facing you. (This position is known as “TAIL IN”)
11.1 Starting the aircraft / Get binding
Power on the remote controller.
Put the aircraft to the horizontal place and power on the aircraft.
The red LED light flashes until goes out, indicating that IMU preheating is complete and
the code binding is successful.
(If the red and blue lights are flashing alternately, it indicates the aircraft is not normal, see the APP indications.)
Open Bluetooth and Cellular Data for mobile device.
11.2 Connect to APP Software
1. Click the icon
on mobile device
The APP icon
2. Click “Select Model”,
select “Voyager 4-4G-4K”,
and then click “Go to Connect”.
3. Select remote controller(RC) ,
click “Connect”.
4. Remote control serial
number will pop up
automatically, click "serial
number and connect”.
5. Select the aircraft serial
number item, click “Setting”.
6. Click "Add", it will
pop up the input box.
7. Enter the serial number
of the aircraft, and note
the name, click "OK."
8. Click "Connect" to enter
the main interface.
Quick Start Guide