17
Audio:
by pressing “
/
” buttons change the audio language.
Subtitle:
alter the subtitle language with“
/
” buttons. The chosen language will be seen in subtitles.
Guide:
by pressing “
/
” buttons change the guide language.
Current
Audio:
if audio language is supported change the audio language by pressing “
/
” buttons
Subtitle:
if subtitle is backed up alter the subtitle language with“
/
” buttons. The chosen language will be
seen in subtitles.
8.3. INSTALLATION
The Installation menu mainly intends to help you for building a Channel Table
into your receiver in most efficient way. These are located in Installation
Menu:
1. Automatic Search
2. Manual Search
3. First Time Installation
8.3.1. AUTOMATIC SEARCH
Automatic search is started by
selecting OK in the auto-search
pop up menu. All the multiplexes
are searched and a channel table
is created automatically. Any
existing channels will be erased.
All channels found are stored in a
sorted form with respect to their
channel numbers.
8.3.2. MANUAL SEARCH
After the OK button is pressed, in Installation Menu, the Manual Search window appears on the screen. Manual
search can be done in 2 different ways.
1.Channel search:
Only Channels can be searched. Enter the number by using the numeric buttons and press OK to commence.
2.Frequency search:
Channels can be searched according to their frequencies. Enter the number via numeric buttons and press OK
to begin.
8.3.3. FIRST TIME INSTALLATION
The user can use this item to load default settings, which had
been loaded to the receiver at the factory. To install factory
settings, highlight ‘First Time Installation’ menu and press OK
button, then you will be asked to confirm for deleting all
channels and settings. By selecting YES and pressing the
OK button, the whole channel table will be deleted. After the
factory settings are loaded, ‘First Time Installation’ will begin.
