14
8.1.2. AUDIO DELAY
By pressing
“▲ / ▼”
buttons on the remote control, you can set to Audio Delay to desired value. You can use
this setting when there is a synchronization problem in the received broadcast . Press
“◄ / ►”
buttons to change
the delay.
Note:
This function will be available while using Optical Audio out only.
8.1.3. LOW POWER
If you select YES, low power mode will be activated. In low power mode the power consumption is less then 1 W (in
standby). The front display will show no time information (in standby). If low power mode is deactivated, all functions will be
reactivated.
8.1.4. FAVOURITE MODE
This function enables or disables the favourite channel list mode by pressing
“◄ / ►”
buttons. If there is no
favourite listing, a warning message is displayed.
8.1.5. CHANNEL LIST
Use
“▲ / ▼”
buttons to go to Channel List option. Use
“◄ / ►”
buttons to toggle Channel List Mode. If you
select “TV Only” you navigate through only TV channels, if you select “Radio Only” you navigate through only
radio channels, if you navigate “Text Only” you navigate through only Text channels with the PR+/PR- buttons. If
you choose “Show All” all, channels can be navigated with the PR+/PR- buttons. To save the recent changes
and exit; press the MENU button.
8.1.6. ACTIVE ANTENNA
Use “▲ / ▼” buttons to go to Active Antenna Setting. The setting will be OFF as default. If you want connect the
receiver to an active antenna that is an instrument amplifying the received signal then you must change the
Antenna Power Supply setting to ON. The DVB-T receiver can supply 30mA (5V active antenna output).
Please
do not use a normal passive antenna (do not short circuit the ANT IN connector) while Antenna Power
Supply setting is ON. This may cause to a breakdown in your DVB-T receiver
.
8.1.7. RECEIVER UPGRADE - OAD
Over Air Download (OAD):
To ensure that your
STB always has the most up to date information.
Please ensure that after use it is set to its standby
mode. The STB automatically powers up at 3.00
A.M. each day and searches for any new
information which may be broadcast and will
download this to your receiver automatically. This
operation will normally take approximately 30
minutes.
