Walker Clarity 500, Owner'S Manual

Page: 16 / 33

Flash
Flash is a feature that enables you to
answer a call if you have call waiting.
Please contact your local telephone
company for information on subscrib-
ing to this feature. Pressing the FLASH
button while you are having a phone
conversation will pick up the second
conversation and place the first call on
hold. Press the FLASH button again to
continue your conversation with the
first caller.
Last Number Redial
Redial allows you to automatically
redial the last telephone number you
called (up to 32 digits). To use this fea-
ture, listen for dial tone and press the
REDIAL button once. Your call will be
dialed. The last number dialed will be
stored in the Clarity 500 for you until
you dial another phone number or dis-
connect the telephone from the wall
jack.
Headset Jack
The unit includes a 2.5 mm headset
jack for connection of a headset. In
the headset mode, the volume of the
headset is controlled adjusting the
Clarity Power Dial.
Headset Operation
Press the HEADSET button to enable
the headset mode. Dial as normal.
The HEADSET button will illuminate
to indicate the phone is in the
headset mode. You may switch
between headset and handset
usage by toggling the HEADSET
button.
Ordering a Headset
In the event you wish to purchase a
headset for your Clarity 500,
please contact Plantronics at 1-800-
544-4660 for location near you.
We recommend using the
Plantronics M110 headset.
Neckloop Jack
A 3.5 mm jack is available for con-
necting a neckloop. The volume to the
neckloop is controlled by the tele-
phone. When the neckloop is plugged
in, the handset is disabled.
Hearing Aid Compatibility
The handset has a special coil inside of
it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.
Failsafe Power Operation
In the event of a power failure, you
can still make and receive calls, but the
LCD display, CID/PhoneBook opera-
tions, Nightlite, and Extra Loud Ringer
will not function. The phone will ring,
but not as loud.
Operating Your Telephone
16