Walker Clarity 500, Owner'S Manual

Page: 20 / 33

Placing a Call from the List
Press MODE once and use the arrow
UP or DOWN to locate the desired
record. Dialing can be done in two
ways:
1. Press ENTER twice, then lift handset
as indicated on the screen.
2. Lift handset while the entry is
displayed, then press ENTER twice.
The HANDSET icon will appear on the
LCD to indicate phone is off hook.
Using the Option Function
Allows you to add a long dis-
tance access code and/or area
code to numbers or delete an
area code from a number stored
in the Caller ID Memory, thus
allowing you to dial directly
from the Caller ID Memory. For
example: A number appears in
the Caller ID Memory as a ten
(10) digit number and it is neces-
sary to dial one (1) plus area
code and phone number to place
the call. If the long distance
access codes and area codes
are programmed into memory,
then by pressing ENTER/DIAL
while reviewing a CID number the
phone will show the local area
codes available to add. If
programmed, the long distance
service code can also bee added.
Scroll UP or DOWN to
highlight the desired code.
Pressing ENTER will append the
number and begin dialing. This
function will also allow you to
highlight and remove an area
code from a stored number to
dial the seven (7) digit local
number.
Saving to PhoneBook
1. While reviewing a call in CID mode
press the PROG button once.
The message SAVE TO THE PB and
the PHONEBOOK Icon will appear.
2. USE ENTER TO END will appear on
screen. Press ENTER to accept and
move to the next screen.
3. NUMBER STORED will appear to
confirm.
4. Press the MODE Button to return to
stand by screen.
Operating Your Telephone
20