Static On Line
•Your phone may be located near a
touch lamp, microwave, refrigerator
or other household appliances. Try
relocating your phone to another
area.
•A cordless phone on your line may
cause static. Try disconnecting the
cordless phone. This may eliminate
the problem.
•Extra devices attached to the tel-
phone, such as cord detanglers, CID
units and answering machines may
cause static. Disconnecting the
devices may eliminate the problem.
Person On The Other End Of The
Telephone Cannot Hear You
•Speak directly into the handset trans-
mitter in your normal tone of voice.
Make sure the transmitter opening is
clean and clear of obstructions.
There Is No Clock Display When The
Telephone Is Hung Up
•Clock is set by the network when a
CID call is received. The clock can
not be reset manually. In event that
the phone is unplugged or a power
failure occurs, you must wait for an
incoming CID call to reset the clock.
Interference
•Check cords and connections.
Frayed or poorly connected cords
can cause interference. Swap cords
if necessary.
•A RFI (Radio Frequency Interference)
filter can be placed on the line to
help minimize or eliminate radio or
CB transmissions. Try relocating the
telephone to another area.
Compatibility
•The Clarity 500 is compatible with
Digital PBX Systems. If a standard,
single line phone works on the
system, your Clarity 500 should also.
•The Clarity 500 is not compatible
with key systems or AT & T PBX
Systems. These units have a large
electronic box controlling many
phones as one unit.
Trouble Shooting
E
N
G
L
I
S
H
27
Summary of Contents for Clarity 500
Page 33: ......
