Walimex Pro W1 TTL T-O, Manual

Page: 50 / 56

47
W1 TTL T-O Operation Method 2
TTL/M Mode
Button
Operation Function
CH/OK
Short press
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Double-click Control the ON/OFF of modeling flash
Long press for
2 seconds
Enter C.Fn custom settings
Long press for
5 seconds
Switch the Operation Methods (Method 1/Method 2)
GR
Short press Set Power/FEC amount
Long press for
2 seconds
Select all the group
MODE Short press
(under normal status) switch the <

Group > mode
(TTL/M/OFF)
Select
Dial
Status Function
Normal
Set <

Group >
Set the
channel
Set the channel amount
Set the group Adjust the group's POWER/FEC amount
21704_walimex pro Funkauslöser W1 TTL T-O_BDA.indd 47 3/12/2018 1:59:39 PM