Walimex Pro W1 TTL T-O, Manual

Page: 36 / 56

33
Transmitter panel
(A) Output Settings per Group in the M Mode; FEC Settings per Group in the TTL
Mode (B) Mode Settings (C) Group (D) Currently Selected Group (Operation Method 2)
(E) Channel Settings (F) Multi Mode Icon (G) Synchronization Delay Setting Icon
(H) Low Battery Indicator (I) Single Contact Icon
6. Preparing the device for use
6.1 Battery
Installing Batteries
As shown in the illustration, slide the battery compartment
lid of the transmitter and receiver and insert two AA batteries
(sold separately).
Low Battery Indication
When the battery power (2 AA batteries <2.4V) gets low,
Status Indicator Lamp blinks quickly (blink cycle=0.5s).
Please replace new batteries, as low power leads to no flash
or flash missing in case of long distance.
CH
A B C
D
E
H
G
I
F
21704_walimex pro Funkauslöser W1 TTL T-O_BDA.indd 33 3/12/2018 1:59:38 PM