Walimex Pro W1 TTL T-O, Manual

Page: 38 / 56

35
7. Operating the device
7.1 Switching the unit on/off
Slide the Power Switch to ON, and the device is on and Status Indicator Lamp will
not blink.
NOTICE
In order to avoid power consumption, turn off the transmitter when not in use.
7.2 HSS High-speed Sync Switch
Slide the switch to ON or OFF to control the HSS high-speed sync‘s on or off.
If is ON, the group‘s mode setting icon will keep blinking.
7.3 Channel settings
1. Short press the <CH/OK> Button until the channel amount blinks.
2. Turn the Select Dial to choose the appropriate channel. Press the <CH/OK>
Button again to confirm the setting.
3. This flash trigger contains 32 channels which can be changed from 1 to 32.
Set the transmitter and the receiver to the same channel before usage.
CH
21704_walimex pro Funkauslöser W1 TTL T-O_BDA.indd 35 3/12/2018 1:59:38 PM