Walimex Pro W1 TTL T-O, Manual

Page: 48 / 56

45
7.14 Selecting the operation method
Press the <CH/OK> Button for 5 seconds to switch the operation methods
(Method 1/Method 2).
W1 TTL T-O Operation Method 1(by default)
TTL/M Mode
Button
Operation Function
CH/OK
Short press
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Double-click Control the ON/OFF of modeling flash
Long press for
2 seconds
Enter C.Fn custom settings
Long press for
5 seconds
Switch the Operation Methods (Method 1/Method 2)
GR
Short press Select the group downwardly
Double-click Select the group upwardly
Long press for
2 seconds
Select all the group
MODE Short press Switch the flash mode of the group (TTL/M/OFF)
Select
Dial
Status Function
Normal No (3 groups) / Turning (5 groups)
Set the
channel
Adjust the channel amount
Set the group Adjust the group's POWER/FEC amount
21704_walimex pro Funkauslöser W1 TTL T-O_BDA.indd 45 3/12/2018 1:59:39 PM