48
Manual 23091 LED Niova 150-F Pro 150W Bi Color
21.2
Manual control of the light
1.
Switch on the light. See chapter 20.
2.
Check whether the operating mode LED (18) is lit. If not, press
the control mode button (23) once or repeatedly until the
control mode LED (18) lights up.
In this mode, you can regulate the brightness as well as the colour
temperature via the rotary knob (20). Switch between the functions
for dimmer [DIMMER] and colour temperature [COLOR] with the
selection key Dimmer / Colour temperature (24). The LED dimmer
(17) or the LED colour temperature (19) light up, depending on
which option is selected.
The rotary knob (20) gives you the option to adjust the brightness
between 10% and 99% in 1% steps, and the colour temperature
between 3,200 and 5,600 K in 100K steps. Turn the rotary knob (20)
to set the desired value.
The digits on the display show the set values: The left two digits
stand for the brightness in percent. The right two digits stand for the
colour temperature in 100 degrees Kelvin, i.e. 32 for 3,200 degrees
K.
21.3
Controlling the light with the remote control unit
To use the remote control (28), fit it with 2x AAA rechargeable
batteries or batteries (not included). Follow the instructions for use
for the rechargeable batteries or batteries you are using
1.
Switch on the light. See chapter 20.
2.
Check whether the control mode LED (18) on the lamp is lit. If
not, press the operating mode button (23) once or repeatedly
until the operating mode LED (18) lights up.
3.
Select a channel that will be used to pair the remote control
and the fixture. Set this on the lamp. Use the channel selection
buttons (21) and (22) to select one of the channels between 1
and 99.
