47
Manual 23091 LED Niova 150-F Pro 150W Bi Color
21
Operating and handling the device
Make the fixture ready for operation as described in the previous
chapters.
WARNING
Danger from heat, electricity or fire
The device and especially the light sources heat up to 60° C
during operation. The device can overheat if you operate it
with the ventilation slots covered. In the event of overheating
or short-circuiting, the device itself and easily flammable
materials in the vicinity of the device may start to burn.
Do not cover the ventilation slots (11) during operation and
when cooling down.
Remove highly flammable materials from the immediate
vicinity of the device.
Do not touch warm or hot parts of the appliance during
operation or when cooling down.
Allow the device to cool down completely and disconnect it
from any power supply before starting any assembly or
cleaning work.
21.1
Operating the device
The fixture features two operating modes that can be switched
between with the operating mode key (23). In [DMX] mode (LED (16)
illuminated), the fixture can be controlled exclusively via DMX. In
[2.4G] mode (LED (18) lights up), you either control the luminaire via
the 2.4 GHz radio remote or you control it manually directly on the
device. Remote control and manual control can therefore be used in
the same mode.
