20
1. With the cuff wrapped around your arm, press the
“START/STOP”
button. Do not inflate the cuff unless it is wrapped around your arm.
All digits will light up to check the display functions. The checking
procedure will be completed after about 3 seconds.
NOTE:
• The Check-with-Confidence
TM
icon will stay on the screen if this
is the 1st or 30th use and the feature is “ON”. The monitor will then
perform a self-check to ensure it is working properly.
2. After all symbols disappear, the display will show “00”. The monitor is
ready to measure and will automatically inflate the
cuff to start measurement.
3. When the measurement is completed, the cuff
will deflate entirely. Systolic pressure, diastolic
pressure, and pulse will be shown simultaneously
on the LCD screen.
The measurement is
then automatically stored into memory.
NOTE:
• This monitor automatically turns off approximately 1 minute after last
operation. You may also press the
“START/STOP”
button to turn
the unit off.
• To interrupt the measurement, you may press the
“START/
STOP”
(recommended) or
“MEM”
buttons. The cuff will deflate
immediately after a button is pressed.
