11
/
START
STOP
Low Battery Symbol:
Appears when batteries should be
replaced, or +/- polarities have been positioned incorrectly.
/
START
STOP
Pulse Symbol:
Shows the heart rate per minute.
Irregular Heartbeat Detector:
See page 22 for more
information.
Risk Category Index:
See page 21 for more information.
Memory Average:
Displays average of last 3 readings.
Excessive Body Motion Detector:
Appears when excessive
body movement, especially of the arm the cuff is worn, is detected
during the measurement. See page 23 for more information.
Note:
The measured blood pressure reading may not be accurate
if the icon is displayed.
Properly wrapping the arm cuff is important. If the circumference of
the upper arm differs largely from the circumference of the forearm,
an excessive gap may occur between the arm and the arm cuff, and
result in the false detection of excessive body motion.
Check-with-Confidence
TM
:
Appears upon first use and then
every 30th use, during the self-check function. See page 18 for
more information.
Display Symbols:
Measurement Error:
Wrap the cuff correctly and keep arm
steady during measurement. Measure again.
Air Circuit Abnormality:
Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg:
Turn the unit off to clear,
then measure again.
Error Determining Measurement Data:
Wrap the cuff
properly, keep steady, and measure again.
System Error:
Turn off monitor and measure again. If “EP” error
still appears on the display, please call a Consumer Relations
representative.
If
and any of the following letters and numbers appear in the area that
systolic pressure should be displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more information.
