18
Cleaning and Maintenance
Weekly Cleaning
NOTE:
If Cooktop usage is very high, we recommend that weekly cleaning procedure is carried
out on a more frequent basis.
Ensure protective gloves are worn during cleaning process.
DO NOT use harsh abrasive detergents, strong solvents or caustic detergents as they will
damage cooktop and burners.
DO NOT use water on trivets and burners while they are still hot as cracking may occur.
Allow these items to cool and remove for cleaning.
DO NOT clean burners in a dishwasher.
Cooktop Cooking Area
a. Clean Cooktop cooking area using a soft cloth moistened with a mild detergent and hot water
solution.
b. Baked on deposits or discolouration may require a good quality stainless steel cleaner or stainless
steel wool. Always apply cleaner when appliance is cold and rub in direction of grain.
c. It should not be necessary to remove splash guards covering burner manifolds for cleaning
purposes. These can be cleaned in situ.
d. Remove grease / spill tray(s) and clean with a mild anti bacterial detergent and hot water solution
using a soft bristled brush.
Dry grease spill tray(s) thoroughly with a dry cloth.
Trivets and Burners
a. Remove trivets from top of the appliance, taking note
that trivets are manufactured with a lip on one edge,
lip must always be fitted to outer edge (front and
back) of Cooktop. (Refer to Fig 10 overleaf).
b. Remove burner cap and burner bowl (these are a
loose fit to manifold, see Fig 5) from top of gas
manifold, taking care not to damage thermocouple
(and pilot tube for -PF Option) fitted through manifold
splash guard. (Refer to Fig 8 for F Option and Fig 9
for PF Option, shown overleaf).
c. Ttrivets and burners should be cleaned with a mild
detergent and hot water solution using a soft bristled
brush. Dry thoroughly with a dry cloth.
Trivet Supports
a. Remove all trivet supports from the top of appliance.
Take note of orientation of trivet support when
removing. Trivet support front end side rail profiles
are different from rear end side rail profiles.
(See
Note shown at Item a in ‘Re-Fitting the Components
to the Cooktop’ below and Figure 5 opposite).
b. Trivet supports should be cleaned with a mild
detergent and hot water solution using a soft bristled
brush.
c. Dry trivet supports thoroughly with a dry cloth.
Notice Difference
in Profiles
Fig 6
Fig 5
Burner Bowl
Burner Cap
Burner Bowl
Locating Holes
Fig 7
Summary of Contents for RN8900G
Page 7: ...5 Dimensions Bench Top Models RN L 8450G B RN L 8900G B ...
Page 28: ......
