Basic Operation
18
M Manual
•
Some rotary controls consist of endless dials or po-
tentiometers. Turning a dial clockwise increases the
corresponding value; turning it counterclockwise de-
creases it. Bipolar parameters (parameters with positi-
ve and negative values) use special gradation when
changing their values. As soon as the value
0
is
reached, the sweep is stopped for a short period to
make it easier to edit.
•
You can press on some dials to set its parameter value
to a default setting.
•
Both
Wavetable/Wave
dials offer a special edit
function. The silver outer ring selects the wavetable
while the inner dark dial selects the wave position of
the current selected wavetable.
r
If you are lost, press the
Recall
button to restore all
parameters of the original sound program.
g
Want to start with a clean initialized sound?
By clicking
Shift + Init
, you can initialize the cur-
rent loaded sound. Keep in mind, that the current
sound program is lost
Storing Sound Programs
After you have finished editing a sound program you must
save it if you intend to use it again. All of M’s memory
locations are available for this purpose.
r
M offers only one active edit buffer for Single or
Multi Arrangement patches. This means that your
current edit buffer will be immediately replaced
when you load a sound from the internal flash stora-
ge by selecting patch or bank. Please, take care of
saving your edits/newly created patches.
The Sound Store display page
Summary of Contents for M
Page 1: ...User Manual ...