Sound Parameters
43
M Manual
number 60. For positive settings, the volume increases on
notes above the reference note, for negative settings the
volume decreases up to higher notes and vice versa. This
setting can be useful to adjust a sound’s volume over the
whole keyboard range. Especially when extensive filtering
is used, the sound can be louder on the lower or the upper
part of the keyboard. On the other side, you can apply this
effect intentionally e.g. for effect sounds.
Mod1 Page
Here you find parameters regarding the amplifier modula-
tions.
MOD1SCR
Selects the modulation source for the amplifier volume
modualtion.
MOD1CTR
Selects the sidechain controller that is used to scale the
output of the modulation source. A typical example is the
Modulation wheel as source and a LFO as the controller.
This allows you to control the intensity of the LFO modula-
tion using the wheel. If no controller is selected, no modu-
lation takes place. If you want to use a classic
source * destination behavior, set MOD1CTR to Max.
MOD1AMT
Determines the amount of modulation applied to the
amplifier volume. This parameter can be set to both positi-
ve and negative values.
Mod2 Page
Here you find additional parameters regarding the ampli-
fier modulations.
MOD2SCR
Selects a second modulation source for the amplifier vo-
lume modulation.
MOD2AMT
Determines the amount of modulation applied to the
amplifier volume. This parameter can be set to both positi-
ve and negative values.
Summary of Contents for M
Page 1: ...User Manual ...
