Waldorf M Page 25 User Manual Download

Page: 25 / 91

Sound Parameters

M Manual

The Oscillator Display Parameters

Press the

OSC

button above the display to show the

oscillator display pages for the corresponding oscilla-
tor  1  or  2.  The  current  selected  oscillator  page  is
shown  in  the  upper  right  corner  of  the  display,  e.g.
OSC2.    Use  the

Sound/System

encoder to scroll

through the display pages.

Both oscillators pages offer nearly the same display

parameters.

Osc 1 & 2 Tune Pages

Here you find all parameters regarding oscillator tuning.

Oscillator 1 Tune display page

The display also informs you about the current

selected wavetables, their Wave positions, and the
oscillator´s tuning status.

OCTAVE

Same functionality as for the corresponding panel parame-
ter.

SEMITONE

Same functionality as for the corresponding panel parame-
ter.

DETUNE

Same functionality as for the corresponding panel parame-
ter.

B.RANGE (Bend Range)

Determines the intensity of the pitchbend (from 0 to 12
semitones) via MIDI Pitchbend messages in semitones for
the corresponding oscillator.

Summary of Contents for M



























































































Search results

Summary of Contents for M

Reviews:

Related manuals for M

Brands by name

Popular brands

Waldorf M, User Manual

Search results

Summary of Contents for M

Reviews:

Related manuals for M

Brands by name

Popular brands