8
Installation
Fitting of Adjustable Feet / Rear Rollers to Leg Stand Units.
1.
Remove grates, griddle plates and radiants
from chargrill.
2.
Lower chargrill onto it’s rear face.
3.
Attach four hob legs to leg mounting positions
on underside of chargrill. Secure each leg
hand tight.
4.
Align four round cut out holes on base tray
with four hob legs already fitted to chargrill
(Ensure that base tray is orientated with
sloping edge of base tray facing front of
appliance).
5.
Slot base tray onto four hob legs and push
fully home.
6.
Secure base tray to chargrill legs by screwing
two front adjustable feet supplied, into base of
front chargrill legs. Secure each adjustable
foot, hand tight.
7.
The two rear leg housings can be fitted with
either adjustable legs or rollers. (See Fig 1).
NOTE:
This appliance is fitted with adjustable
feet to enable it to be positioned securely
and level. This should be carried out on
completion of gas connection. Refer to
'Gas Connection' section overleaf.
This appliance can also be fitted with rear
rollers to enable appliance to be easily
moved for positioning and cleaning
purposes. If desired, these rollers are
supplied in the packaging, with the
appliance.
Rear Adjustable Feet, fitting:-
a. Secure rear of base tray to rear chargrill legs by
screwing two adjustable feet supplied, into base
of rear chargrill legs.
b. Secure each adjustable foot, hand tight.
Rear Rollers, fitting:-
a. Fit rear leg securing bolts up through centre of
rear leg housings to secure rear of base tray to
rear chargrill legs and tighten up bolts using a
24mm socket.
b. Fit rear rollers to rear leg supports.
c. Secure rear rollers to rear leg supports using
locating bolts supplied.
d. Tighten locating bolts using a 10mm spanner.
8.
Lift chargrill back onto its legs / rollers and refit all
grates, griddle plates and radiants to chargrill, ensuring
they are correctly fitted.
9.
Adjust adjustable feet to level appliance.
Fig 1
Chargrill
Chargrill
Legs
Base Tray
Leg Mount
Points
Adjustable
Foot
Rear
Roller
Rear Leg
Securing Bolt
Roller
Locating
Bolt
Rear Leg
Housing
TO
PREVENT
EQUIPMENT
DAMAGE
AND
RISK
OF
INJURY
,
REMOVE
ALL
CHARGRILL
CASTINGS
,
BURNERS
AND
OTHER
REMOVABLE
ITEMS
PRIOR
TO
FITTING
THE
LEG
STAND
.
Warning
Summary of Contents for CH8300G
Page 24: ......
