Wahuda 60170ML-WHD, User Manual

Page: 19 / 32

19
OPERATIONS (cont.)
WARNING!
MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE POWER
SOURCE.
REMOVING AND INSTALLING THE DRIVE CENTER
1) To remove the drive center (A) locate the push rod (B) While holding the drive center,
insert the push rod through the center hole of the headstock wheel (C) and push the drive
center out. A light tap with a rubber mallet may be used. SEE FIG 11 & 12
2) To re-insert the drive center, place it in the hole in the faceplate, and while using a block of
wood and a hammer, tap the drive center to
“set” it in the headstock.
REMOVING AND INSTALLING THE LIVE CENTER
1) To remove the live center (A) from the tailstock, insert the push rod through the hole in the
tailstock wheel (B), and while holding the liver center, push the live center out. A light tap
with a rubber mallet may be used.
2) To re-install the live center, place it back in the hole, and while using a block of wood and a
hammer, tap the live cente
r to “set” it in the tailstock. SEE FIG 13