Wahuda 60170ML-WHD, User Manual

Page: 13 / 32

13
UNPACKING & INVENTORY
Check shipping carton and machine for damage before unpacking. Carefully remove packaging
materials, parts and machine from shipping carton. Always check for and remove protective
shipping materials around motors and moving parts. Lay out all parts on a clean work surface.
Please keep all packaging materials until the machine is properly running and all items have been
accounted for. Also, please dispose of all packaging materials responsibly.
Any visible protective coatings, on metal surfaces only, can be removed by spraying WD-40 on a
soft cloth and wiping the surfaces.
Apply a light coat of good quality paste wax over the lathe bed to allow the banjo and tailstock to
glide smoothly across the bed and to prevent corrosion. Make sure to buff out the wax before
assembly.
Compare the items to inventory figures and verify that all items are accounted for. If any parts are
missing, do not attempt to power on the machine. For missing parts, or shipping damage, contact
WAHUDA at
techservices@wahudatools.com or call 877-568-8879 .
A - 4 Prong Drive Center (already installed in headstock)
B
– Standard 60 degree Live Center (already installed in tailstock)
C
– Push Rod
D
– Magnetic Index pin (Can be stored on machine, out of the way of moving parts)
E
– Carrying handles with four ¼ unc x 5/8” (coarse) mounting screws
F
– Power cable hooks with four mounting screws
G
– Spanner Wrench
Hex wrenches (not shown)
User Manual