Wahuda 60170ML-WHD, User Manual

Page: 15 / 32

15
ASSEMBLY & ADJUSTMENTS (cont.)
FASTENING LATHE TO SUPPORTING SURFACE
If during operation there is any tendency for the lathe to tip over, slide, or walk on the
supporting surface, the base of the lathe must be secured to the supporting surface with
fasteners (not supplied) through the four threaded holes (
3/8"x16 UNC) located in the feet
of the lathe bed.
ELECTRONIC INVERTER CONTROL UNIT
The electronic Variable Frequency Drive (VFD) inverter control unit by Delta Electronics,
located on the rear of the machine, provides constant torque throughout the speed range
of the machine. It has been adjusted and calibrated at the factory and should never need
any adjustments. If adjustment is ever necessary, it MUST be done by a certified
electrician. SEE FIG 4
For questions, more information, and adjustments of the VFD inverter control unit, contact
Delta Electronics at 919-767-3813 or visit www.deltaww.com