Wahuda 60150ML-WHD, User Manual, Page: 18 / 28

OPERATIONS
（
cont.
）
WARNING! MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE POWER
SOURCE.
REMOVING AND INSTALLING THE DRIVE CENTER
To remove the drive center (A) locate the push rod (B) While holding the drive center, insert the
push rod through the center hole of the headstock wheel (C) and push the drive center out. A light
tap with a rubber mallet may be used. SEE FIG 11 & 12
1.
18
To remove the live center (A) from the tailstock, insert the push rod through the hole in the tailstock
wheel (B), and while holding the liver center, push the live center out. A light tap with a rubber mallet
may be used.
1.
To re-install the live center, place it back in the hole, and while using a block of wood and a hammer,
tap the live center to “set” it in the tailstock. SEE FIG 13
2.
2. To re-insert the drive center, place it in the hole in the faceplate, and while using a block of
wood and a hammer, tap the drive center to “set” it in the headstock.
REMOVING AND INSTALLING THE LIVE CENTER
FIG13
A
B
FIG11 FIG12
A B C