Wahuda 60150ML-WHD, User Manual, Page: 15 / 28

ASSEMBLY & ADJUSTMENTS
（
cont.
）
FASTENING LATHE TO SUPPORTING SURFACE
If during operation there is any tendency for the lathe to tip over, slide, or walk on the supporting
surface, the base of the lathe must be secured to the supporting surface with 4ea fasteners (See page
13) through the four threaded holes (3/8"x16 UNC) located in the feet of the lathe bed.
15
ELECTRONIC INVERTER CONTROL UNIT
The electronic Variable Frequency Drive (VFD) inverter control, located on the rear of the machine,
provides constant torque throughout the speed range of the machine. It has been adjusted and
calibrated at the factory and should never need any adjustments. If adjustment is ever necessary, it
MUST be done by a certified electrician. SEE FIG 4
FIG 4