Wahuda 60150ML-WHD, User Manual, Page: 14 / 28

ASSEMBLY
WARNING! MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE POWER
SOURCE BEFORE ASSEMBLY AND ADJUSTMENTS
NOTE: 95% of the machine comes fully assembled. If you need help assembling the remaining 5%,
use the parts diagram and parts list at the back of this manual for assistance.
CARRYING HANDLES
Locate the 1 carrying handle (Seen on Page 13 ) and 4 pre-installed screws to the right end of the
lathe. See FIG 1 ( The left carrying handle locate is pre-installed to the left end of the lathe ) 1.
POWER CABLE HOOKS
The 2 power cable hooks and 4 screws are pre-installed in the rear of the bed. See FIG 2 & 3 1.
14