Wahuda 60150ML-WHD, User Manual, Page: 12 / 28

GROUNDING INSTRUCTIONS
（
cont.
）
Make certain the extension cord is properly sized, and in good electrical condition. Always replace a
worn or damaged extension cord immediately or have it repaired by a qualified person before using it.
Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
UNPACKING & INVENTORY
Check shipping carton and machine for damage before unpacking. Carefully remove packaging
materials, parts and machine from shipping carton. Always check for and remove protective shipping
materials around motors and moving parts. Lay out all parts on a clean work surface.
Please keep all packaging materials until the machine is properly running and all items have been
accounted for. Also, please dispose of all packaging materials responsibly.
Any visible protective coatings, on metal surfaces only, can be removed by spraying WD-40 on a soft
cloth and wiping the surfaces.
Apply a light coat of good quality paste wax over the lathe bed to allow the banjo and tailstock to glide
smoothly across the bed and to prevent corrosion. Make sure to buff out the wax before assembly.
NOTE: Some parts pictured may already be installed on your machine at the factory.
Go through the entire manual before contacting WAHUDA.
Compare the items to inventory figures and verify that all items are accounted for. If any parts are
missing, do not attempt to power on the machine.
For missing parts, or shipping damage, contact WAHUDA at techservices@wahudatools.com or
call 877-568-8879.
12