213.805.022
9
Date: 2022-09-19
Safety functions
The control system ensures that the motor only is powered when:
The control signal is reliable.
The position and speed control are on.
The motor position is calculated after which a PID regulator calculates the motor speed and
distance.
No overload.
Winch 10 cable should only be operated by an experienced DMX-controlled-lighting-desk-
operator. The lighting desk must be programmed according to the manual, so the winch will stop
when the speed is put to 0%. It is also possible for the user to stop the winch by disconnecting it
from the main. After power failure the start position of the winch needs to be reset before the
winch can function again.
Manual operation of the winch is only intended for mounting, service, and tests.
Area of use
For indoor use only!
WARNING! To reduce the risk of electric shock or injury: use indoors only
WARNING! To reduce the risk of electric shock, do not expose to rain: store indoors!
The winch is intended for indoor use only. It is designed for lifting and lowering material at the
weight and speed stated in "Technical specifications" on page 5. Any other use of the winch may
result in a risk of injury of persons or equipment damage.
Exceeding the load rating may cause failure of the equipment.
Use only approved rigging connectors to secure the load to the lifting cable and do not wrap the
lifting cable around the load as this will damage the lifting cable and result in a risk of injury of
persons or equipment damage.
Do not modify the winch. For any modification of your winch, contact Wahlberg.
It is the customer's sole responsibility to comply with any relevant local laws, regulatory
requirements, and restrictions, concerning the use of the winch.
Summary of Contents for Winch 10 Cable
