213.805.022
18
Date: 2022-09-19
Emergency Stop
There is no dedicated emergency stop for this winch. The winch is controlled from a lightning
desk, where it should always be set up with a button that sets the speed of the winch in operation
to 0%.
Normally lighting desks
gnals to 0% and this will also cause
the winch to stop.
MODE setting
The MODE setting allows you to operate the winch in different ways. Each MODE setting has a
given function. Each mode gives an opportunity for different operational settings of the winch.
The MODE is selected using the MODE selector on the Winch.
The winch needs to be reset, before the positioning MODE is possible. The winch can be reset
manually or automatically. The winch must be reset each time its power supply has been
disconnected.
Read the passage about controlling the soft TOP and BOTTOM limits, to explore and setup the
winch for your own particular needs.
WARNING! Only operate the winch when there is a clear view to the winch and area beneath it.
WARNING! Before running the winch, ensure that the area beneath the winch is cleared to
avoid risk of injury.
WARNING! When resetting the winch in MODE 2, it is important to decrease the speed, as the
snap hook is closing in on the motor-house, otherwise the lifting cable and winch can be
damaged.
WARNING! MODE 7 and MODE 8 is only for service and tests!
Summary of Contents for Winch 10 Cable
